Poly-Dike™ fiberglass systems combine technology and practical simplicity in a unique modular design for temporary and permanent applications. Poly-Dike™ is an advanced state of the art secondary containment diking system designed to aid industry in meeting mandated government regulations for
the safe containment of hazardous liquids, should a spill occur.  Pre-manufactured at our factory and installed on a designated site by Polystar factory trained technicians, Poly-Dike™ modular systems offer, by far, the best alternative to traditional concrete.

Poly-Dike™ systems feature:

Environmental Flight, 140 SPTG/CEV, recently oversaw the up-grade of the secondary containment dike system surrounding a 6,500-gallon poly tank containing de-icing fluid. The sand bag and poly liner system had decayed to the point where it was no longer functional. The new 30” high, heavy-duty Poly Dike™ system provided by Containment Corporation, offers a long term, safe, and attractive replacement.

Dim. 20’ x 20’ x 30” high
Capacity 7,000 plus gallons

Video of Test Demo

See the video of our recent set-up and testing of the Bladder Dike® System:

          
(low quality)                             (high quality)

(requires Windows Media Player® or compatible player)

The Bladder Dike® System (BDS)

Easy set-up: 1 hour on most systems
Heavy duty: resists direct blow from bladder explosion
Long lasting: fiberglass walls hold up to wear and tear
Portable: system can be broken down and moved relatively easily

Tennessee Valley Authority used the Poly Dike™ Wall system to create temporary holding ponds required for their operations. Note the installation steps followed:

(1) Following nuclear site strict requirements they build a sub-floor for the liner. This is NOT required in most applications.

(2) Poly Dike™ wall systems are quickly assembled to form a containment wall. The 10' long component wall sections interlock to form a rugged support structure around the containment area.

(3) The liner is rolled out and draped over the Poly Dike™ walls. Modular Corner Protectors cover excess liner material in the corners.

(5) Pictured is a finished CPD Pond System. Most customers cut excess liner material away once the cap is secured. These systems can be installed in a couple hours.