home requests contact about sitemap e-mail
Custom Poly Tub™


VIEW / PRINT CUTSHEETS
   
View Cutsheet        View Cutsheet 		Reservoirs and Clarifiers? > New PDF, Click here!

Fiberglass Industrial Secondary Containment Systems

Poly-Tub™ systems have been designed to aid users in meeting governmental secondary containment regulations for smaller applications.  Poly-Tub™s' unique concept of monolythic fiberglass design including one piece walls, decks and supporting structure sets it apart from conventional poured
concrete walls and floor.  Custom Poly-Tub™ designs include sizes that can handle 150 through 15,000 gallon tanks, totes and drums. Poly-Tubs™ are a proven, low-cost solution to secondary containment needs.

  • TOUGH FIBERGLASS CONSTRUCTION
  • CHEMICALLY RESISTANT
  • EASILY CLEANED
  • VERSATILE AND REUSABLE
  • LIGHTWEIGHT AND EASILY HANDLED
  • PORTABLE AND AFFORDABLE

CUSTOM POLY FLAT PANEL CONTAINMENT TUBS:
The three pictures to "right" are of a
transformer containment pad. Built for an
Indiana Utility in 2002; they needed to
provide secondary containment for a
transformer sitting on a grated platform
over a stream. Note: opening under
platform for power lines. See tie-downs
on outside of pad, and threaded drain
opening in side of pad.

CUSTOM CONTAINMENT DIKES AND BARRIERS:
(Pictured Left) 30" barrier containment wall installed in around machinery in plant. This project was completed in one day.
(Picture Right) 150' of 12" high wall was
installed between tanks and open field at
Air Force base. Project was completed
in one day.
 
(Pictured Left) Water run-off barrier. Water
treatment plant controlled water run-off by
installing a barrier wall. Note: 2" drain pipe at
bottom of catch basin. Project took one day.

ABOVE GROUND TANK (AST) CUSTOM CONTAINMENT:
These three pictures demonstrate how to
contain large above ground tanks,
WITHOUT MOVING THE TANKS.

(Left) Heavy-duty flat panel containment
poly dike shown. 16' x 40' x 4' high system
with deck completed over floating concrete
pad. Ideal, with low profile wall height for
new or replacement transformer sites.
(Two Pictures to Right) These pictures
demonstrate a complete containment
system with floor. The finished system
was transported to the customer's site
and lower into position next to a
building. Extremely strong, all weather,
fiberglass composite construction
matches or exceeds concrete in
performance and longevity without the
problem of cracking or separation.
 

UNIQUE CONTAINMENT SYSTEMS
Poly Dike™ system's superior strength allows application design to provide for free space bridging and contact adaptation, such as retrofitting onto or around existing concrete or steel (right) pads without the need for poured footers.
         
         
         
       
VIEW / PRINT CUTSHEETS
   
View Cutsheet        View Cutsheet
Poly Tub and Poly Dike are trademarks of Polystar Inc.
Containment Corp is the exclusive representative of Polystar Inc.'s containment systems to the state and federal governments in the United States.
(800) 235-7421
 ^ TOP ^